With this wish we would like to fund working on supporting software-based RAID for IPFire.
IPFire is widely used in the professional area. Enterprises rely on the great software but sometimes forget that reliable hardware is required, too. Harddisks are one of the most likely components to fail which then results in a huge downtime until the system has been reinstalled and was set up again. This could cause huge costs because of idle employees.
To overcome this problem we would like to implement RAID support for IPFire right in the installer of the system. This will enable everyone to install IPFire on a RAID-1 setup with two harddisks or SSDs. We are going to use software RAIDs for this purpose because of various issues with hardware RAID controllers. Those are fragile and if they break they require owning an identical second one to backup data from the disks. With the software-based approach, you will be able to use any Linux system to mount the disks again and recover any data if required. They are also usally much faster with modern hardware and of course save you a lot of money because they do not require any additional hardware. Hardware RAID controllers are usually very expensive.
We are also planning on having good monitoring in case if any device fails. The administrator of the system will then see an alert notification that a disk has failed and needs replacement.
Please help us funding this wish. The new functionality will help IPFire to become even more suitable for use in companies where high availability is an important requirement. This is a great solution which works for everyone and will additionally boost the disk performance and saves you buying an expensive hardware RAID controller.
Launched: April 16, 2015 at 12:00 am • This funding runs until the goal is reached.